A panoramic X-ray — often called a PANO — captures a single, sweeping image of the entire mouth in one pass. The resulting radiograph shows the upper and lower jaws, all erupted and developing teeth, the temporomandibular joints (TMJs), and portions of the nasal cavity and sinuses. Because it records broad anatomical relationships rather than small, localized detail, a PANO is particularly useful when clinicians need a big-picture view of oral structures before making diagnostic or treatment decisions.
That wide field of view makes it possible to detect concerns that might be missed on individual intraoral films, including unerupted or impacted teeth, large areas of bone loss, cysts, obvious fractures, and other structural changes. It does not replace close-up bitewing or periapical X-rays for detecting early cavities, but it complements those images by revealing patterns and pathologies that require a more comprehensive perspective.
For patients, the value of a PANO is practical as well as clinical: it helps the dental team form a coordinated treatment plan more efficiently. When combined with a clinical exam and other imaging as needed, a panoramic radiograph helps establish both the what and the where — what the issue is and where it sits within the jaw and facial skeleton.
Panoramic radiographs are produced by a specialized machine that rotates around the patient’s head while the X‑ray source and image receptor move in opposite directions. The patient typically stands or sits with their chin on a rest and gently bites a small plastic guide to stabilize the jaw. The entire rotation only takes a few seconds, and the finished image is available immediately in digital form for review and storage.
Modern panoramic systems use digital detectors and efficient exposure protocols, which keep radiation exposure low compared with older film-based units. Because the scan captures a broad area at once, the technical requirements for image acquisition differ from intraoral films — positioning and stillness are important to avoid distortion. Staff will take a moment to position you correctly and explain how to hold still during the sweep to ensure a clear result.
Safety practices are standard: the dental team follows established guidelines to minimize exposure, and images are ordered only when they add clear clinical value. If you are pregnant or think you might be, it’s important to tell the team so they can adjust care as appropriate. Otherwise, a PANO is a quick, low‑burden diagnostic tool that fits naturally into many dental visits.
PANOs are versatile and commonly used across many areas of dental care. They are a go-to for evaluating wisdom teeth and other impacted or developing teeth, giving a reliable sense of tooth position and proximity to vital structures such as the inferior alveolar nerve. For patients considering extractions or surgical procedures, a panoramic image helps the clinician map the anatomy and anticipate challenges before the first incision.
Implant planning and full-arch assessments also benefit from panoramic imaging. While cone beam CT (CBCT) provides more detailed three‑dimensional information when required, a PANO offers an efficient first look at bone height, jaw shape, and the spatial relationship of teeth and anatomical landmarks. Orthodontists frequently rely on panoramic images to confirm the presence or absence of permanent teeth and to evaluate jaw growth patterns as part of comprehensive planning.
Aside from planning procedures, PANO images act as a screening tool for broader conditions such as large cysts or tumors, extensive bone changes, and certain sinus issues that can affect dental care. When the panoramic image suggests something that needs closer investigation, your dentist may recommend targeted intraoral films or a referral for three-dimensional imaging to refine the diagnosis.
Preparing for a panoramic X‑ray is straightforward. You’ll be asked to remove eyeglasses, jewelry, and any removable dental appliances that could interfere with the image. After standing or sitting in the machine, the clinician will guide you into the correct alignment and ask you to bite lightly on a positioning guide; remaining still during the brief rotation is the key to a sharp image. The whole procedure typically lasts less than a minute from positioning to completion.
Comfort-wise, a PANO is noninvasive and painless. The scanning arm moves around your head without touching you, and there is no need to hold sensors inside the mouth as with intraoral X‑rays. If you have mobility concerns or difficulty standing, staff can accommodate seated positioning and extra support to make the process comfortable and accessible.
After the scan, the digital image is reviewed with you as part of the clinical exam. The dentist will point out notable findings and explain whether additional imaging or follow-up is warranted. Because the image is stored in the digital chart, it can be compared with future radiographs to monitor changes over time, which is especially useful for long-term treatment planning and surveillance.
Interpreting a panoramic radiograph is a skill that combines pattern recognition with clinical context. Dentists look for symmetry, bone density, tooth position, and any unusual radiolucent or radiopaque areas that might indicate cysts, calcifications, or other conditions. If the PANO shows areas that need closer scrutiny, the clinician will order supplementary images or tests to obtain the level of detail required for a definitive diagnosis.
Some findings on a PANO can be managed directly in the general practice, while others may prompt referral to a specialist — for example, an oral surgeon for complex extractions or a periodontist for extensive bone loss. The panoramic image helps guide those decisions by identifying priorities and potential risks so that the care pathway is organized and predictable.
At Kokomo Smile Creations, we integrate panoramic imaging into our diagnostic workflow to ensure treatment recommendations are grounded in complete, contemporary information. Whether the next step is conservative monitoring, targeted restorations, or a coordinated surgical plan, the panoramic X‑ray plays a central role in shaping an efficient, patient-centered approach.
In summary, a panoramic X‑ray is a fast, low‑radiation way to obtain a comprehensive view of the mouth and surrounding structures. It complements detailed intraoral images and helps clinicians spot and plan for issues that require wide-angle assessment, from impacted teeth to structural jaw concerns. If you’d like to learn more about when a PANO might be recommended or how it fits into a specific treatment plan, please contact us for more information.
A panoramic X-ray, commonly called a PANO, captures a single wide-angle image of the entire mouth, including both jaws, erupted and developing teeth, the temporomandibular joints and portions of the sinuses. This broad view helps clinicians see how teeth and supporting structures relate to one another across the full dental arch. It is a diagnostic tool used to screen for conditions that affect large areas rather than small, localized problems.
Because a PANO records overall anatomical relationships, it is especially useful when a big-picture perspective is needed before making treatment decisions. It complements, rather than replaces, intraoral films that focus on fine detail like early cavities. When combined with a clinical exam and other images as needed, a panoramic radiograph helps form a coordinated treatment plan efficiently.
Panoramic X-rays produce a two-dimensional overview of the jaws and surrounding structures, while intraoral films (bitewings and periapicals) provide high-resolution, close-up views of individual teeth and their roots. Cone beam CT (CBCT) produces three-dimensional images that reveal fine details of bone and tooth positions when complex planning or surgical precision is required. Each modality serves a different clinical purpose and is selected according to the diagnostic question at hand.
In practical terms, a PANO is efficient for screening, orthodontic assessments and initial surgical planning, while intraoral films are preferred for detecting early decay and detailed root issues. CBCT is reserved for cases where three-dimensional information will change the planned approach, such as certain implant placements or complicated surgical cases. The dental team combines these imaging types as needed to achieve a complete and accurate diagnosis.
Modern panoramic systems use digital detectors and optimized exposure settings, which keep radiation levels low compared with older film-based equipment. Dental teams follow established safety guidelines to ensure each image is justified and taken with appropriate shielding and technique. Staff will position patients carefully and use the minimum exposure required to produce diagnostically useful images.
If you are pregnant or suspect you might be, inform the team so they can take extra precautions or postpone nonurgent imaging when appropriate. For most patients, a panoramic X-ray is a quick, low-burden diagnostic tool that fits naturally into many dental visits. The emphasis is always on balancing diagnostic benefit with prudent radiation stewardship.
Preparation for a panoramic X-ray is simple: you will be asked to remove eyeglasses, jewelry and any removable dental appliances that could interfere with the image. The clinician will position you standing or seated with your chin on a rest and a small plastic bite guide to stabilize the jaw; remaining still during the brief rotation is essential for a sharp image. The actual sweep of the machine typically takes only a few seconds, and the digital image is available immediately for review.
The procedure is noninvasive and painless because the scanning arm moves around your head without entering the mouth. Staff can accommodate patients who have mobility limitations by providing seated positioning or additional support. After the scan, the dentist will review the image with you and explain any notable findings and recommended next steps.
A panoramic X-ray is well suited to detect conditions that span large areas of the jaws, such as unerupted or impacted teeth, large cysts, obvious fractures and extensive areas of bone loss. It can also reveal jaw asymmetry, certain sinus issues that affect dental care and calcifications or anomalies in the broader facial skeleton. These findings are often not captured on localized intraoral films because those images focus on small, specific areas.
While a PANO is effective for spotting broad patterns and structural changes, it is not optimized for detecting very small cavities or early-stage periodontal defects. When the panoramic image indicates a concern that requires closer inspection, targeted intraoral X-rays or three-dimensional imaging may be ordered to obtain the detail necessary for diagnosis and treatment planning. The panoramic view serves as a valuable screening and planning tool in that workflow.
PANOs are commonly recommended when evaluating wisdom teeth, planning extractions or assessing developing teeth because they provide a reliable sense of tooth position and proximity to vital structures like the inferior alveolar nerve. They are also useful as an initial step in implant planning and full-arch assessments to check bone height and jaw form before determining if three-dimensional imaging is required. Orthodontists frequently use panoramic images to confirm the presence or absence of permanent teeth and to evaluate growth patterns.
For many routine and preliminary surgical cases, a panoramic radiograph gives enough information to guide clinical decisions and to identify cases that need referral or advanced imaging. If the PANO suggests complex anatomy or risk factors, the team will recommend supplemental imaging or specialist consultation to finalize a safe and effective treatment plan. This staged approach helps organize care and anticipate challenges ahead of time.
Although panoramic radiographs provide a valuable overview, they have lower spatial resolution than intraoral films and can be subject to distortion if the patient moves or is improperly positioned. Small cavities, fine root fractures and subtle bone changes are often better visualized on bitewing or periapical images, so a PANO should not be relied on for those detailed assessments. Additionally, superimposition of anatomical structures in a two-dimensional image can obscure some findings.
Because of these limitations, panoramic images are best used as part of a comprehensive diagnostic process rather than a standalone test. Dentists interpret the PANO in the context of a clinical exam and order targeted intraoral films or CBCT scans as needed to obtain the level of detail required for definitive diagnosis and treatment. Clear communication between clinician and patient helps ensure the right imaging is chosen for each situation.
Interpreting a panoramic radiograph requires clinical context and pattern recognition; dentists assess symmetry, bone density, tooth position and any unusual radiolucent or radiopaque areas that could indicate cysts, tumors or calcifications. If the PANO reveals an area that needs closer examination, the clinician will recommend supplemental imaging or tests to obtain the necessary detail for a definitive diagnosis. Some issues can be managed in general practice while others may prompt referral to an oral surgeon, periodontist or other specialist.
At Kokomo Smile Creations, panoramic imaging is integrated into the diagnostic workflow to ensure treatment recommendations are grounded in complete information. The PANO helps identify priorities and risks so that any follow-up — whether monitoring, targeted restorations or coordinated surgical care — is organized and predictable for the patient. The team will explain findings, next steps and the rationale for any additional imaging or referrals.
To prepare for a panoramic X-ray, remove eyeglasses, hairpins, necklaces and any removable dental appliances that could create artifacts on the image. Follow the staff's positioning instructions carefully and bite lightly on the plastic guide as directed to stabilize your jaw, and remain still during the short scan to avoid motion blur. If you have mobility concerns, notify the team ahead of time so accommodations can be made for comfortable and secure positioning.
Communicate any relevant health information, such as pregnancy or recent surgeries, so the dental team can make appropriate adjustments or defer nonurgent imaging when necessary. Proper preparation and clear communication help produce a diagnostic-quality image on the first attempt, reducing the need for repeat exposures. The process is quick and designed to be accessible for most patients.
Panoramic images are typically stored digitally in the patient's chart so they can be reviewed immediately and compared with future radiographs to monitor changes over time. Digital storage facilitates multidisciplinary communication and coordinated care, allowing images to be shared with specialists or used in treatment planning without loss of image quality. The ability to reference prior PANOs is especially valuable for long-term surveillance of impacted teeth, bone changes and other progressive conditions.
Because these records become part of the permanent dental file, they support informed decision-making across appointments and providers. Patients can discuss image comparisons with their dentist to understand how conditions are evolving and to evaluate the impact of treatment interventions. Secure digital practices ensure images remain accessible and protected within standard health record systems.
Kokomo Smile Creations is a family-focused dental practice led by Dr. Alec Willard, proudly serving Kokomo and the surrounding communities for generations. We're committed to personalized, comfortable care in a smaller, more intimate office where you're treated like family.

Where to Find Us
412 West Walnut Street, Kokomo, IN 46901